AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Cgminer for raspberry pi3/19/2023 The Pool configuration which is used in the example above should be replaced by your own pool configuration data. cgminer -o stratum+tcp://:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x -suggest-diff 32 -gekko-newpac-freq 150 The following command will start up the CGMiner Software (example): cd ~/mining/newpac/cgminer We achieved best results with dem Arctic Breeze Mobile 92 mm (quiet, performant, high-quality). We recommend a quality USB fan for operating clock rates greater than 150 MHz. For more details please check the following link on : here Users reported several compatibility issues with USB 3.0 Hubs with Intel chipsets. We highly recommend the GekkoScience 7-Port USB Hub which was specifically designed for the operation with USB stick miners. This USB Stick Miner requires a actively powered USB Hub which can independently provide 2 A for each USB port We have achieved good results with several USB 2.0 Hubs from Anker or Orico. This command returns a list of detected miners. autogen.sh -enable-gekkoĮxplanation notes: The build parameter –enable-gekko activates the GekkoScience drivers both for Compac (single ASIC) and 2Pac (dual ASIC). The build command for Ubuntu 16.04.1 LTS (or higher) is slightly different: CFLAGS="-O2 -march=native". Now you can clone the GekkoScience CGMiner branch from GIT: mkdir -p mining/newpac cd mining/newpacĪfter successful cloning you can start to build CGMiner: CFLAGS="-O2". Sudo apt-get install -y build-essential git autoconf automake libtool pkg-config libcurl4-openssl-dev libudev-dev libusb-1.0-0-dev libncurses5-dev libncurses5-dev: text based user interface for CGMiner.libusb-1.0-0-dev: USB support for CGMiner.libcurl4-openssl-dev: http connectivity for CGMiner.libtool: provides shared library access for CGMiner.build-essential: Compiler and Compile-Werkzeuge.The following packages are mandatory to properly build CGMiner: It’s not necessary to use root.įirst steps: update and upgrade of system and reqired packages: sudo apt-get update This installation guide describes setup, configuration and build based on a freshly installed Raspbian (Debian) or Ubuntu installation. Preparation, Package Dependencies, Configuration and Build for Raspbian – Kernel version: 4.4 (Debian 8.7.1) or higher of for Ubuntu 16.04.1 LTS or higher Preparation
0 Comments
Read More
Leave a Reply. |